New Shed or Garage Base
Sheds and garages need a base that sits flat and doesn't shift under weight over time. We prepare and pour a base sized to the structure, so anchor bolts line up and the floor stays level once it's built.
Concrete Slabs
Concrete Slabs
Concrete Slabs Built Right Across Parramatta
We pour concrete slabs across Parramatta and Western Sydney, from a small pad in Ermington to a full extension base in Kellyville. Whether you're putting up a shed, adding a workshop, or need solid ground for a new build, a properly prepared slab is what everything else sits on. Get that wrong and cracking, uneven settling, and drainage problems follow you for years.
If you're planning a new slab anywhere in Parramatta or the surrounding suburbs, we're ready to talk through the job and get you a firm quote.
When You Need It
When You Need a New Concrete Slab
Home Extensions and Renovations
When you're adding a room, an alfresco, or converting part of the yard, the new slab needs to tie in properly with the existing structure and finished heights. We handle that so the addition sits right, not stepped or out of level.
Workshop and Studio Floors
A workshop, studio, or granny flat floor takes more punishment than a standard pad, tools, machinery, and regular foot traffic. We reinforce and finish it to handle that load without cracking under normal use.
General Purpose Concrete Pads
For storage sheds, bin areas, clotheslines, or equipment pads, sometimes you just need a solid, level surface where there wasn't one before. We size and finish these to suit exactly what's going on top.
A Flat Solid Surface That Stays That Way
Once the formwork comes off, you're left with a flat, even surface that's ready for whatever comes next, a shed frame, a workshop fit out, or the next stage of a build. Water runs off the way it should instead of pooling against a wall or door. The surface holds its level over time, so whatever you put on it stays square and doesn't shift.
Options
Finish and Reinforcement Options for Your Slab
Broom Finish
A broom finish gives the surface a light texture, which is the standard choice for most slabs where grip matters more than the look, sheds, workshops, and general pads.
Steel Trowel Finish
A steel trowel finish is smoother and flatter, better suited to slabs that will be covered with flooring or need a clean, level base for other work.
Reinforcement and Joint Layout
We choose mesh or reinforcing bar based on what the slab needs to carry, and place control joints to manage where the concrete moves as it cures, instead of letting it crack somewhere random.
Our Process
How We Handle Your Concrete Slab
The Quote and Site Assessment
We look at your site, talk through what the slab needs to carry, and put together a firm, written quote before anything starts.
Prep and the Pour
We prepare and compact the base, place reinforcement, then pour and finish the slab on the day we scheduled it.
The Result
You're left with a flat, solid slab that's ready for the next stage, once it's had time to cure properly.
Why Choose Us
Why We're the Right Team for Your Slab
A slab that cracks or settles unevenly almost always comes down to what happens before the concrete gets poured, not after. We prepare the base properly, compact it, get the reinforcement right for what the slab needs to carry, and manage drainage so water doesn't sit against the edge or run back under a structure. That's what keeps a slab flat and crack free for the long run. It isn't just about a smooth finish on the day.
We also give you a firm, written quote before we start, so there are no surprises once the job is under way. When we say we'll be there to pour, we're there. The site's ready, the truck's booked, and the job gets finished on the day we said it would.
Get a Firm Quote on Your Slab
FAQ
Common Questions About Concrete Slabs
Will my concrete slab crack or wear unevenly over time?
Cracking is usually caused by a base that wasn't compacted properly, reinforcement that doesn't suit the load, or joints that weren't placed to control movement. We manage all three at the start, so your slab is set up to stay solid, not just look good on pour day.
Do you handle site prep, reinforcement, and drainage, or is that extra?
Site prep, reinforcement, and drainage are part of the job, not an add-on. We assess what the slab needs to carry and the ground it's going on, then include the right prep and reinforcement in the quote from the start.
How long does the concrete need to cure before I can build on it or walk on it?
Concrete generally takes a few days before it can handle light foot traffic and around four weeks to reach full strength. We'll talk you through the right timeline for your job so you know exactly when it's ready for the next stage.
Do you provide a firm, written quote before starting?
Yes. We provide a firm, written quote before any work starts, so you know exactly what's included and there's nothing added once the job is under way.
Can you work around a tricky site or existing structure?
Every block is different, tight access, a slope, or an existing structure nearby. We look at the site before pricing the job, so the quote reflects what your job actually involves, not a generic rate.